Saturday, February 24, 2007

Ferret: Planning Detail

As requested and so not to confuse people, these are the plan drawings of the Ferret, Copyright Dream Pod 9. They have scale indicators to show what the original scale is on them.




So, now we have a visual reference. To engage the wheels, the unit sits down on the rear wheel and slides the feet forward to about 30 degrees from vertical. I'm working out the kinematics and sizing to match my servo size targets.

Sunday, February 11, 2007

Ferret is GO for Design!

Well I've begun a project to give me a final target design. I blame the 1/6 scale RC paintball tanks for making me think about this. I started wondering "what if I make a Gear?"

For those who don't know me, Gears are humanoid one man IFV's from the game world of Heavy Gear from Dream Pod 9.

I did some scale calculations, and I'd be seeing 3 foot tall models if I went with 1/6 scale. So, I decided to target 1/12 scale (although this will be changed as I look at the realities of frame scaling) and pick one of the oddest designs available: the Ferret.

Ferrets are a cross between a walking robot and a motorcycle. Short and stubby, it has a large powered rear wheel that provides secondary locomotion when the front legs are locked together and the heel wheels are rotated down to provide a semi-tricycle arrangement.

So, what components do I see as part of this project?

-DSPServo design and standardization (Hitec 645MG and 805BB shall be my targets due to their high torque and good speeds)
-DC motor control (powered rear wheel)
-High amp switching power supply (based on a dsPIC design)
-Imaging
-Sonar
-Structural design
-IMU

I do plan to "arm" this thing too. I might make a four-part weapons layout. One scale-simulation armament plan based on IR LED (laser tag) hardware. Another may be based on low cost airsoft conversions. To play with the tanks, I might build a paintball bazooka. Last would be rockets based off my look-see into homebuilt Nerf weaponry. I can see a mix being good (rockets done in Nerf, cannons and lasers built around Lasertag and/or airsoft). Time will tell.

Given the specialized nature of this, I think I might have to break this off into another Blog once I have enough background down. Not everyone knows of Gears, of course.

Back to the drawing board...

Sunday, January 21, 2007

CAN Bus designs - Servo and Power Supplies

Over the last month I've been working on the hardware for my CAN enabled smart RC servo board. Due to space constraints, I've decided to make it a double board.

Common components are two 6 pin 0.1" headers with 0.6" spacing. The CPU board contains the CPU, CAN transciever, and a few power conditioniong components. I am currently trying to avoid needing a LDO onboard. A four pin (two power two signal) header provides access to the network. The power board contains the H bridge and related sensors (current, voltage, temperature). I'm still trying to decide where to stick the analog potentiometer. One pin header is 6 analog signals. The other header is the four PWM lines and a ground and 5V power supply to provide power to the sensors. There's also a pair of separate unregulated power lines to provide motor power.

To make the LDO-less idea feasible, I need an efficient and low noise power system available. While I have some good sized capacitors on the digital supply input pins, I may need to take a different approach if this doesn't work well. This is why I decided to work with a split board design instead of attempting to beat together a monoboard design, at least until I have the design proven out.

So, to power this system, I'm looking at a DC-DC converter. I've been checking out Microchip's SMPS hardware. I'd love to create a dsPIC based design, but I think that'll take more work than I want to right now, plus I need to do a lot of safety design then. So, I'm planning a SMPS based around a stand-alone TI chip, the TPS5430, with a supervisory and control PIC riding along side. The idea here is to provide a garaunteed 2A 5V supply with a 10mV output ripple. I hope to make each power module talk to the rest to allow for some load balancing, but I'm afraid of some sort of interference. 22AWG wire is rated for 2A continuous power, roughly. The supply can do 3A with a 4A burst. I'm thinking about making the CAN passthrough on the board have one side powered. I'm considering making some of my less space constrained designs having an input voltage monitor so I can feed information back to the monitoring PIC to allow it to adjust the 5V output to provide sufficient power to the entire CAN string. I just don't know enough yet.

It's actually quite funny that I've been finding the dsPICs to be equivalent cost to similarly equipped 18F chips. While I haven't been able to verify, given that I'm aiming for near-constant operation for a lot of these devices, I hope that running a much lower clocked dsPIC will pull less power than the 18F for moderate-math applications.

Monday, December 11, 2006

Because Mike Said So

Technorati Profile

This is done for the uses of "claiming" this blog via Technorati. Does anyone even USE that thing?

Fun: Gunnplexer Radar Components

So, what's available for radar components on the open market? Most radar guns (aka cheap hardware) is either in the 10GHz band or the 24GHz band. These high frequencies are also used by ham radio operators, so they sometimes try to use these as high bandwidth line of sight radio links.

So, where to get them?

IF you want new, expect to pay $500 to $1000 per node. Advanced Reciever is one that lets you know without requesting a quote.

How about used?

Well, depending on availability, you can assemble much of the parts you need from SHF Micro.


So, my friend Creuzer was wondering about interesting feedback effects versus police radar, so let's go over what you'd have to do. Police radar works purely on doppler effect. Gunnplexers use a pair of tuned diodes to produce a beat frequency from a continuous wave source, so speed is a simple conversion of output frequency to speed. Now, how do you play games with one?

If the police radar is "dumb" (common), the radar electronics will lock onto the most powerful signal. Because your return is FAR more powerful than his reflection, you should win this fight. Now, the tricky part. You'd have to take in his signal, determine the initial doppler shift from knowing your own speed, and then fire off the right frequency to add or subtract whatever you want to to that radar signal.

A "smart" radar system (does it even exist?) that looks for a specific strength return requires more time and investment. You'd have to apply something (like, say SHF's Eccosorb AN-73) that will reduce your radar profile. Of course, you also have to protect the usually expensive components, which would require a good dielectric (radar transparent) coating of plastic over the top. You might also need to apply a fine metal mesh to your windows to keep the RF from bouncing off your head and back to the gun (and then you can control the radiant direction more). Anyway,
you'd have to take a power measurement and try to radiate back a certain percent of that. This would also help with the "dumb" radar but it's far more expense than it's worth.

Sounds simple? Well, it might be, but there's an issue. Radar gunnplexers tend to "float" their tuning all over the place within a 3GHz band, and you usually only have 100MHz or so of available bandwidth. So, know your police radar bands and hope they have it tuned! Mind you, the old hardware worked at either X band (10.5 to 10.55GHz) or K Band (24.05 to 24.24GHz). Relatively more modern hardware runs somewhere between 34.2 and 35.2GHz. I've only found one reference to these, and it was from Japan and cost about $3000 per unit if my translation is right. 35GHz is becoming more common, though, I've seen a lot of miniature radar units (for UAVs) being built around hardware at this frequency.

And that is why I don't mind spilling this little tidbit. Unless your local police is using hardware from the 80's (they might be though!), you'll probably never be able to mess with their readings.

Tuesday, December 05, 2006

Fun Thoughts: Bad Drivers

I've read several traffic related stories lately, mostly about the new tailgate detecting laser system deployed in Airzona. Interesting, but I thought of a far more interesting result.

Everyone seems to have a cartop cargo pod these days. How about we spruce one up?

First, bolt on a few fiberglass Sidewinder lookalikes. I'd probably modify them so you can point one forward and one behind. Add cones to the engine are to both disguise the fake-ness and help with the aerodynamics.

Second, put a couple of windows in the front and rear. Behind these put a surplus 10GHz or 24GHz Gunnplexer and horn (the core waveguide of most police radars) and a 905nm IR laser with optics to provide a flat cone (police laser radar). This will let you light up someone's life if they're the speedy paranoid type or the annoying tailgater. This will have no effect on those who don't have radar detectors. I'd probably have to add in an LED system in the missile "nosecones" that would pulse in time with the radar pulse. Wonder what people would notice and believe from the movies...

Now, add a custom "I support direct application of traffic law" bumper sticker and some fake (or real) vehicle battle scars, and you'll have yourself a winner.

Not a cheap project. Figure $50-100 per emitter, plus the cargo carrier plus the missiles and mounts. You'll probably end up spending $1000 on this toy in the end.

A lot of space will still be available. What to do with it?

Careful design would allow you to place an automotive PC plus a bunch of sensors up top. Hook up a lot of cameras and you could provide a 360 degree tour (plus traffic stops by curious cops!). You could also run an algorithm to track speeders and get actual speed from them (it'd take some additional circuitry on the gunnplexers). A dedicated computer controlled pan-tilt-zoom camera turret would let you get a REAL good photo of them, too. GPS would be an obvious addition, too.

Now, silly and probably (highly) illegal stuff. Drill out and place LOTS of RGB LEDs in the exterior. Almost invisible when off, you could give yourself whatever lights you'd want depending on the control program. Keep the top clear and put a plastic bubble on top with a fake (or real) radar antenna spinning in it. THAT would get some attention. Maybe you could claim it's a weather radar? I know some people would actually want the missiles on the side to shoot, but I cannot condone that, nor having a mine dropper in the back to bomb that tailgater with grenades/caltrops/deer carcasses.